산업 뉴스

  • 조 크러셔 마모 부품 마모 비율

    조 크러셔 마모 부품 마모 비율

    Jaw Crusher Wear Parts Wear Ratio   Jaw crusher wear parts include: Upper cheek plates Lower cheek plates Movable jaw Fixed jaw In normal working conditions, different wear parts have different wear ratios. In order to avoid damage the jaw crusher, we must know every wear part wear ratio....
    더 읽기
  • 1피스와 2피스 죠 플레이트 디자인의 비교

    1피스와 2피스 죠 플레이트 디자인의 비교

    Comparisons Between 1 piece and 2 piece jaw plate design   There are some jaw plates are designed to 1 piece or 2 pieces. Different designs suit different jaw crushers and working conditions. Normally, large jaw crusher jaw plates are originally designed to use a 2 piece jaw die design, whi...
    더 읽기
  • 조 크러셔 중간 플레이트

    조 크러셔 중간 플레이트

    Jaw Crusher Intermediate Plate   The intermediate plate is an important jaw crusher wear parts. Fitting an intermediate (backing) plate behind the fixed jaw die reduces the nip angle of the crusher. The intermediate plate reduces the feed opening and the setting range by approximately the s...
    더 읽기
  • 조 크러셔 보호 플레이트

    조 크러셔 보호 플레이트

    Jaw Crusher Protection Plate   Protection plates are designed for additional protection of the crusher’s frame and pitman. They are recommended when using small settings (always greater than or equal to the minimum recommended setting) and/or when the rock to be crushed is very hard (i.e. v...
    더 읽기
  • 1피스 턱 플레이트 교체

    1피스 턱 플레이트 교체

    1 PIECE JAW Plate REPLACEMENT   Jaw plates can either be turned end for end or replaced depending on their wear. The jaw dies can be turned once after their installation before they need to be replaced. Dismantling Fixed Jaw Plates Clean the jaw die lifting holes. Remove stones and sand f...
    더 읽기
  • 2피스 턱 다이 교체

    2피스 턱 다이 교체

    2 PIECE JAW DIE REPLACEMENT   Jaw dies can either be turned end for end or replaced depending on their wear. The jaw dies can be turned once after their installation before they need to be replaced. Fixed Jaw Die Clean the jaw die lifting holes. Remove stones and sand from the jaws. Remo...
    더 읽기
  • 조 크러셔 분쇄 챔버

    조 크러셔 분쇄 챔버

    Jaw Crusher Crushing Chamber   To ensure optimum performance and cost-effective production it’s important to frequently inspect the following parts and to replace them before they are completely worn out. 3500-0 Deflector plate (moving jaw only) 3400-0 Clamping bar 3300-1 Jaw plate 3100-0...
    더 읽기
  • 조 크러셔 설정 조정 시스템

    조 크러셔 설정 조정 시스템

    Jaw Crusher Setting Adjustment System   Maintenance for these parts must be carried out only by trained or authorized personnel, but the inspection can be performed by the operator. Worn components should be replaced in good time to avoid damaging the toggle plate or toggle seats, with a co...
    더 읽기
  • 죠 플레이트 교환

    죠 플레이트 교환

    Exchanging jaw plate   After a long time running, jaw plates need an exchange.  The following wear parts are required: A new fixed jaw plate A new movable jaw plate Never weld external lifting eyes to the jaw plates. Always use the referred lifting cavity on the jaw plate and the lifting ...
    더 읽기
  • 죠 플레이트를 설치하는 방법?

    죠 플레이트를 설치하는 방법?

    Installing jaw plate   There are some things that need to notice when installing jaw plates. 3500-0 Deflector plate (moving jaw) 3300-1 Jaw plate 3100-0 Wear plate 3200-0 Support bar. 1 Lifting cavity,2 Lifting tool. If planning to exchange wear plates (3100-0), cheek plates, deflector p...
    더 읽기
  • 조 크러셔 마모 플레이트 교환

    조 크러셔 마모 플레이트 교환

    Exchanging jaw crusher wear plate   How to exchange jaw crusher wear plates? What needs notice when exchanging jaw crusher wear plate? 3000-0 Jaw (moving) 3100-0 Wear plate 3200-0 Support bar 3200-1 Lifting eye Recommended tools: Crow bar, Lifting tackle, and chain Mobile crane The follo...
    더 읽기
  • 조 크러셔 치크 플레이트 교체 및 설치

    조 크러셔 치크 플레이트 교체 및 설치

    Exchange and Install Jaw Crusher Cheek Plate   Cheek plates are one of the most important jaw crusher wear parts. After a long time working, those cheek plates need exchange. How to exchange jaw crusher cheek plates?  How to install jaw crusher cheek plates? How to exchange jaw crusher chee...
    더 읽기
123456다음 >>> 페이지 1 / 14