Pan American resumit Mexico res
Pan Americana Argentea (TSX: PAAS) denuntiavit operationes suas in fodinis Dolores et La Colorada in Mexico resumisse, secutus sileo suarum Shahuindo, La Arena, San Vicente et operationibus Manantial Espejo, mense Maio initiatis.
Cuniculi initio ad facultates redactas operantur ut nova protocolla protocolla respondeant ad 19 covid accommodanda, Pana Americana dixit.
Pan Americanus etiam nunc exspectat potestatem regulatoriam ut Huaron et Morococha res in Peruvia repetendas sit.
Secundus-maximus mundi effector argenteus in suis metallis operationes normales in Mexico, Peru, Argentina et Bolivia mense Martio obtemperet ut mensuras quarantinas nationales amet impleret.
Fodinae Timmins occidentales et Bell Creek in Canada ad 90% facultatem operandi perstiterunt.
"Progredimur diligenti accessu ad operationes sileontes, dum ad integras productiones nostras operationes reparandas laboramus, salutem et salutem populi nostri defendentes," dixit CEO Michael Steinmann.
Pan Americanus suum 2020 ducatum operans die 12 Martii 2020 reduxit, datis incertitudinibus ad pandemiam pertinentibus.
Medii Martis, Pan Americani stirps 6% in TSX occubuit. Societas C$8.1 miliarda mercatus uncialium habet.
Electio materialis Ball Mill Liner
Diversae materiae contritae, diversae conditiones operantes diversis materiis liners ad sectam indigent. Item, crassus stridor cellula et tenuis cellula stridor diversis liners materialibus indigere.
H&G Machinery suppeditat materiam sequentem ut pila mola liner proiciat:
Manganese Ferro
Manganesum contentum altitudinis manganese globulus globulus bracteae molae oblinit fere 11-14% est, et carbo contentus fere 0.90-1.50% est, quarum pleraeque supra 1.0% sunt. Ad onera impulsum humilis, duritia HB300-400 attingere potest. Ad altum ictum onera, duritia HB500-800 attingere potest. Secundum onus impulsum, profundum stratum obfirmatum 10-20mm attingere potest. Stratum duratum cum magna duritia resistere potest ictum et laesuram indumenti minuere. Princeps manganesum ferrum optimum anti-stipendium effectum habet sub conditione validi ictum laesurae lapsum, unde saepe in renitentibus partibus fodiendi induti, materiae constructionis, potentiae scelerisque, aliisque instrumentis mechanicis adhibitis. Sub condiciones condiciones impulsum humilis, summus ferrum manganesum proprietates materiae exserere non potest, quia labor obdurationis effectus non patet.
Chemical Compositio
| Nomen | Chemical Composition（%） | |||||||
| C | Si | Mn | Cr | Mo | Cu | P | S | |
| Mn14 Mill Liner | 0.9-1.5 | 0.3-1.0 | 11-14 | 0-2.5 | 0-0.5 | ≤0.05 | ≤0.06 | ≤0.06 |
| Mn18 Mill Liner | 1.0-1.5 | 0.3-1.0 | 16-19 | 0-2.5 | 0-0.5 | ≤0.05 | ≤0.06 | ≤0.06 |
Mechanica et metallographic structura
| Nomen | Superficiem duritiem HB） | Impact valorem Ak（J/cm2） | Microstructure |
| Mn14 Mill Liner | ≤240 | ≥100 | A+C |
| Mn18 Mill Liner | ≤260 | ≥150 | A+C |
| C -Carbide | Carbide A-austenite | Austenite | |||
Product speciem
| Magnitudo | Foramen Dia.（mm） | Longitudo liner（mm） | ||
| ≤40 | ≥40 | ≤250 | ≥250 | |
| tolerantia | +20 | +30 | +2 | +3 |
Chrome Alloy Steel
Chromium stannum ferrum in altum chromium stannum ferrum conflatum dividitur (chromium contentum 8-26% carbonis contentum 2.0-3.6%), chromium medium stannum ferrum conflatum (chromium contentum 4-6%, chromium carbonii 2.0-3.2%), chromium humile. Tria genera mixturae ferrum fundentes (chromium 1-3% contentum, carbo 2.1-3.6%). Praeclarum eius notum est quod microhardness carbidi M7C3 eutectici HV1300-1800 est, quae in modum retis fractae et in martensite (difficillima structura matricis metallica) distribuitur, effectum in vulvam reducens. Summus ergo chromium stannum liner altam fortitudinem, pila molendini duritiem, et altum indumentum resistentiae habet, et eius effectus summam repraesentat materiae obsistentis metalli currentis gradus.
Chemical Compositio
| Nomen | Chemical Composition（%） | |||||||
| C | Si | Mn | Cr | Mo | Cu | P | S | |
| Princeps Chrome Alloy Liner | 2.0-3.6 | 0-1.0 | 0-2.0 | 8-26 | ≤3.0 | ≤1.2 | ≤0.06 | ≤0.06 |
| Media Chrome Alloy Liner | 2.0-3.3 | 0-1.2 | 0-2.0 | 4-8 | ≤3.0 | ≤1.2 | ≤0.06 | ≤0.06 |
| Low Chrome Alloy Liner | 2.1-3.6 | 0-1.5 | 0-2.0 | 1-3 | 0-1.0 | ≤1.2 | ≤0.06 | ≤0.06 |
Mechanica et metallographic structura
| Nomen | Surface（HRC） Ak（J/cm2） | Microstructure | ||||
| Princeps Chrome Alloy Liner | ≥58 | ≥3.5 | M+C+A | |||
| Media Chrome Alloy Liner | ≥48 | ≥10 | M+C | |||
| Low Chrome Alloy Liner | ≥45 | ≥15 | M+C+P | |||
| M- Martensite | C - Carbide | A-Austenite | P-Pearlite | |||
Product speciem
| Magnitudo | Foramen Dia.（mm） Liner Longitudomm） | |||
| ≤40 | ≥40 | ≤250 | ≥250 | |
| tolerantia | +20 | +30 | +2 | +3 |
Cr-Mo Alloy Steel
H&G Machineria Cr-Mo utitur ferro mixturae ad pilam molam liner ejiciendam. Haec materia in vexillum Australiae fundatum, (AS2074 Standard L2B, et AS2074 Latin L2C）it' praebet superiorem ictum et resistentiam in omnibus applicationibus semi-autogenous millinging.
Chemical Compositio
| Code | Elementa chemica | |||||||
| C | Si | Mn | Cr | Mo | Cu | P | S | |
| L2B | 0.6-0.9 | 0.4-0.7 | 0.6-1.0 | 1.8-2.1 | 0.2-0.4 | 0.3-0.5 | ≤0.04 | ≤0.06 |
| L2C | 0.3-0.45 | 0.4-0.7 | 1.3-1.6 | 2.5-3.2 | 0.6-0.8 | 0.3-0.5 | ≤0.04 | ≤0.06 |
Corporalis Property & Microstructure
| Code | duritia HB） | Ak（J/cm2） | Microstructure |
| L2B | 325-375 | ≥50 | P |
| L2C | 350-400 | ≥75 | M |
| M-Martensite, C-Carbide, A-Austenite, P-Pearlite | |||
Ni-durum Steel
Ni-Hard est ferrum album iactum, nickel et chromium mixtum ad ictum humilis idoneum, ad abrasionem labens cum applicationibus humidis et siccis. Ni-Hard est materia valde obsistens, in formis et formis coniectis quae usui sunt apta in laesura et in ambitus et applicationes vestium.
Chemical Compositio
| Nomen | C | Si | Mn | Ni | Cr | S | P | Mo | duritia |
| Ni-Hard AS2027 Gr Ni Cr 1-550 | 3.2-3.6 | 0.3-0.8 | 0.2-0.8 | 3.0-5.0 | 1.5-3.0 | ≤0.12 | ≤0.15 | ≤0.5 | 550-600HBN |
| Ni-Hard AS2027 Gr Ni Cr 2-550 | 2.8-3.2 | 0.3-0.8 | 0.2-0.8 | 3.0-5.0 | 1.5-3.0 | ≤0.12 | ≤0.15 | ≤0.5 | 500-550HBN |
| Ni-Hard AS2027 Gr Ni Cr 2-550 | 3.2-3.6 | 1.5-2.2 | 0.2-0.8 | 4.0-5.5 | 8.0-10.0 | ≤0.12 | ≤0.15 | ≤0.5 | 630-670HBN |
* * * * * * * * * * * * * *
Chemical Compositio
| Nomen | Chemical Compositio(%) | |||||||
| C | Si | Mn | Cr | Mo | Cu | P | S | |
| White iron Steel liner | 2.0-3.3 | 0-0.8 | ≤2.0 | 12-26 | ≤3.0 | ≤1.2 | ≤0.06 | ≤0.06 |
Corporalis Property & Microstructure
| Nomen | HRC | Ak(J/cm2) | Microstructure |
| White iron Steel liner | ≥58 | ≥3.5 | M+C+A |
| M-Martensite C- Carbide A-Austenite | |||
Si specialem materiam inquisitionis habes, pete fectum nostrum ad serviendum tibi!
Nick Sun [email protected]
Post tempus: Iun-19-2020