Zirconium, titanium, teknụzụ nnụcha nke ụwa na-adịghị ahụkebe nke Korea kwadoro
Australian Strategic Materials kwuputara na onye ya na ya na-arụkọ ọrụ na Korea, Zirconium Technology Corporation, nyere $4.5 nde onyinye nke gọọmentị Korea ka e jiri mee ihe na mmepe nke njikọ aka ụlọ ọrụ.
A ga-edobe ego ahụ na ọrụ ASM na ZironTech iji mepụta teknụzụ nnụcha ọla dị ala, dị elu nke enwere ike itinye na zirconium, titanium na ala ndị na-adịghị ahụkebe maka ihe ndọta na-adịgide adịgide.
N'akwụkwọ mgbasa ozi, ụlọ ọrụ ndị tinyere aka na atụmatụ a kwuru na e bu n'obi na nkà na ụzụ a bụ iji dochie usoro mmepụta ike na-eme ka ike gwụ nke ọma site na iji ihe ọzọ dị mma na gburugburu ebe obibi, na-adigide na ọnụ ahịa.
"Anyị nwere obi ụtọ na ma ASM na nkà na ụzụ anyị na-etolite na mmekorita ya na ZironTech bụ ndị gọọmenti Korea ghọtara dị ka ihe dị oké mkpa na njem ya iji hụ na ọkọnọ maka ihe ndị dị mkpa," onye isi nchịkwa nke Australian Strategic Materials, David Woodall, kwuru na nkenke mgbasa ozi.
"Teknụzụ iji mepụta ọla dị oke egwu na-agbakwunye uru na ọrụ anyị ma bụrụ isi ihe na-eto eto teknụzụ ọhụrụ na ngalaba nrụpụta Korea na Australia, na gọọmentị siri ike na-elekwasị anya n'ịbawanye mmepụta ụlọ iji nweta nkwụsi ike ọkọnọ."
Woodall kwuru na JV dị n'etiti ASM na ZironTech na-emecha ọrụ nke ụlọ ọrụ pilot azụmahịa ya iji mepụta ọla ndị a dị oke ọcha n'otu aka ahụ na ịmepụta ihe maka ụlọ ọrụ mmepụta ihe nke mbụ n'ụwa.
"Nke a ga-enyere aka gboo mkpa na-eto eto maka isi mmalite ọhụrụ n'ahịa ụlọ na nke zuru ụwa ọnụ maka ụdị ọla dị oke mma nke ASM dị oke ọcha na uru bara uru - gụnyere zirconium, ọla magnetik ụwa na-adịghị ahụkebe (praseodymium na neodymium), niobium, na hafnium," onye isi kwuru.
Nhọrọ ihe eji eme Ball Mill Liner
Ihe dị iche iche agbajiri agbaji, ọnọdụ ọrụ dị iche iche chọrọ ihe mkpuchi ihe dị iche iche dabara adaba. Ọzọkwa, ebe a na-egweri ahịhịa na ebe a na-egwe nri dị mma chọrọ liners dị iche iche.
H&G Machinery na-enye ihe ndị a iji tụba igwe igwe igwe bọọlụ gị:
Manganese ígwè
Ọdịnaya manganese nke nnukwu manganese ígwè igwe igwe igwe ihe igwe ihe na-eme ka ọ bụrụ 11-14%, ọdịnaya carbon na-abụkarị 0.90-1.50%, ọtụtụ n'ime ha karịrị 1.0%. Na ibu mmetụta dị ala, ike ike nwere ike iru HB300-400. Na oke mmetụta dị elu, ike ike nwere ike iru HB500-800. Dabere na ibu mmetụta, omimi nke oyi akwa siri ike nwere ike iru 10-20mm. Ngwunye siri ike nke nwere ike dị elu nwere ike iguzogide mmetụta ma belata ihe mgbochi. Ngwongwo manganese dị elu nwere arụmọrụ mgbochi na-eyi nke ọma n'okpuru ọnọdụ nke mmetụta siri ike na-eyi abrasive, ya mere a na-ejikarị ya na akụkụ ndị na-eguzogide oyi nke Ngwuputa, ihe owuwu, ike ọkụ, na ngwá ọrụ ndị ọzọ. N'okpuru ọnọdụ nke ọnọdụ mmetụta dị ala, ígwè manganese dị elu enweghị ike ịmepụta àgwà nke ihe ahụ n'ihi na ọrụ siri ike na-arụ ọrụ abụghị ihe doro anya.
Ngwakọta kemịkalụ
| Aha | Ngwakọta kemịkalụ (%) | |||||||
| C | Si | Mn | Cr | Mo | Ku | P | S | |
| Mn14 Mill Liner | 0.9-1.5 | 0.3-1.0 | 11-14 | 0-2.5 | 0-0.5 | ≤0.05 | ≤0.06 | ≤0.06 |
| Mn18 Mill Liner | 1.0-1.5 | 0.3-1.0 | 16-19 | 0-2.5 | 0-0.5 | ≤0.05 | ≤0.06 | ≤0.06 |
Mechanical Njirimara na metallographic Ọdịdị
| Aha | Ịdị ike n'elu ala (HB) | Ọnụ ahịa mmetụta Ak (J/cm2) | Microstructure |
| Mn14 Mill Liner | ≤240 | ≥100 | A+C |
| Mn18 Mill Liner | ≤260 | ≥150 | A+C |
| C -Carbide | Carbide A-ejigide austenite | Austenite | |||
Nkọwapụta ngwaahịa
| Nha | Hole Dia (mm) | Ogologo ogologo (mm) | ||
| ≤40 | ≥40 | ≤250 | ≥250 | |
| Ndidi | +20 | +30 | +20 | + |
Chrome Alloy Steel
Chromium alloy nkedo ígwè na-ekewa n'ime nnukwu chromium alloy cast iron (chromium ọdịnaya 8-26% carbon ọdịnaya 2.0-3.6%), ọkara chromium alloy cast iron (chromium ọdịnaya 4-6%, carbon ọdịnaya 2.0-3.2%), obere chromium. Ụdị ígwè nkedo alloy atọ (ọdịnaya chromium 1-3%, ọdịnaya carbon 2.1-3.6%). Akụkụ ya dị ịrịba ama bụ na microhardness nke M7C3 eutectic carbide bụ HV1300-1800, nke a na-ekesa n'ụdị netwọk gbajiri agbaji ma dịpụrụ adịpụ na martensite (ihe owuwu kachasị sie ike na matrix metal) matriks, na-ebelata mmetụta nkwụsị na matriks. Ya mere, akwa akwa chromium alloy liner nwere ike dị elu, ihe igwe igwe na-esi ike, na nkwụsi ike dị elu, na arụmọrụ ya na-anọchite anya ọkwa kachasị elu nke ihe ndị na-eguzogide ígwè ugbu a.
Ngwakọta kemịkalụ
| Aha | Ngwakọta kemịkalụ (%) | |||||||
| C | Si | Mn | Cr | Mo | Ku | P | S | |
| High Chrome Alloy Liner | 2.0-3.6 | 0-1.0 | 0-2.0 | 8-26 | ≤3.0 | ≤1.2 | ≤0.06 | ≤0.06 |
| Middle Chrome Alloy Liner | 2.0-3.3 | 0-1.2 | 0-2.0 | 4-8 | ≤3.0 | ≤1.2 | ≤0.06 | ≤0.06 |
| Obere chrome Alloy Liner | 2.1-3.6 | 0-1.5 | 0-2.0 | 1-3 | 0-1.0 | ≤1.2 | ≤0.06 | ≤0.06 |
Mechanical Njirimara na metallographic Ọdịdị
| Aha | Elu (HRC) Ak (J/cm2) | Microstructure | ||||
| High Chrome Alloy Liner | ≥58 | ≥3.5 | M+C+A | |||
| Middle Chrome Alloy Liner | ≥48 | ≥10 | M+C | |||
| Obere chrome Alloy Liner | ≥45 | ≥15 | M+C+P | |||
| M-Martensite | C - Carbide | A-Austenite | P-Pearlite | |||
Nkọwapụta ngwaahịa
| Nha | Hole Dia.(mm) Ogologo ogologo (mm) | |||
| ≤40 | ≥40 | ≤250 | ≥250 | |
| Ndidi | +20 | +30 | +20 | + |
Cr-Mo Alloy Steel
H&G Machinery na-eji Cr-Mo alloy steel tụọ bọọlụ igwe ihe. Ihe a dabere na ọkọlọtọ Australia, (AS2074 Standard L2B, na AS2074 Standard L2C) ọ na-enye mmetụta dị elu ma na-eyi nguzogide na ngwa igwe igwe ihe niile.
Ngwakọta kemịkalụ
| Koodu | Ngwakọta kemịkalụ (%) | |||||||
| C | Si | Mn | Cr | Mo | Ku | P | S | |
| L2B | 0.6-0.9 | 0.4-0.7 | 0.6-1.0 | 1.8-2.1 | 0.2-0.4 | 0.3-0.5 | ≤0.04 | ≤0.06 |
| L2C | 0.3-0.45 | 0.4-0.7 | 1.3-1.6 | 2.5-3.2 | 0.6-0.8 | 0.3-0.5 | ≤0.04 | ≤0.06 |
Ngwongwo anụ ahụ & Microstructure
| Koodu | Isi ike (HB) | Ak (J/cm2) | Microstructure |
| L2B | 325-375 | ≥50 | P |
| L2C | 350-400 | ≥75 | M |
| M-Martensite, C-Carbide, A-Austenite, P-Pearlite | |||
Ni-hard Steel
Ni-Hard bụ ígwè nkedo na-acha ọcha, nke nwere nickel na chromium dabara adaba maka mmetụta dị ala, abrasion na-amị amị maka ma mmiri mmiri na ngwa akọrọ. Ni-Hard bụ ihe na-egbochi ike eyi nke ukwuu, nke a na-atụba n'ụdị na ụdị nke dị mma maka ojiji na gburugburu ebe obibi na ngwa ngwa.
Ngwakọta kemịkalụ
| Aha | C | Si | Mn | Ni | Cr | S | P | Mo | Isi ike |
| Ni-Hard AS2027 Gr Ni Cr 1-550 | 3.2-3.6 | 0.3-0.8 | 0.2-0.8 | 3.0-5.0 | 1.5-3.0 | ≤0.12 | ≤0.15 | ≤0.5 | 550-600HBN |
| Ni-Hard AS2027 Gr Ni Cr 2-550 | 2.8-3.2 | 0.3-0.8 | 0.2-0.8 | 3.0-5.0 | 1.5-3.0 | ≤0.12 | ≤0.15 | ≤0.5 | 500-550HBN |
| Ni-Hard AS2027 Gr Ni Cr 2-550 | 3.2-3.6 | 1.5-2.2 | 0.2-0.8 | 4.0-5.5 | 8.0-10.0 | ≤0.12 | ≤0.15 | ≤0.5 | 630-670HBN |
Igwe Ọcha ọcha
Ngwakọta kemịkalụ
| Aha | Ngwakọta kemịkalụ(%) | |||||||
| C | Si | Mn | Cr | Mo | Ku | P | S | |
| White Iron Steel Liner | 2.0-3.3 | 0-0.8 | ≤2.0 | 12-26 | ≤3.0 | ≤1.2 | ≤0.06 | ≤0.06 |
Ngwongwo anụ ahụ & Microstructure
| Aha | HRC | Ak (J/cm2) | Microstructure |
| White Iron Steel Liner | ≥58 | ≥3.5 | M+C+A |
| M-Martensite C- Carbide A-Austenite | |||
Ọ bụrụ na ị nwere ajụjụ ihe onwunwe pụrụ iche, biko kpọtụrụ onye injinia anyị ka o nyere gị aka!
Nick Sun [email protected]
Oge nzipu: Jun-28-2020