Zambia's CEC txiav tawm fais fab mov rau Konkola Copper Mines
Zambia's Copperbelt Energy Corp (CEC) yuav tsum tsis txhob muab lub zog rau Vedanta lub chaw hauv cheeb tsam Konkola Copper Mines (KCM) txij hnub Monday, nws tau hais tias tom qab kev sib tham txog kev txuas ntxiv rau lawv daim ntawv cog lus cog lus tau tawg dhau cov nuj nqis tshuav rau CEC.
Zambia tus Minister of Energy Mathew Nhkuwa hais rau Reuters tias tam sim no KCM yuav tau txais nws lub zog ncaj qha los ntawm lub xeev cov nqi hluav taws xob Zesco, uas yav dhau los tau muag hluav taws xob rau CEC rau kev xa khoom mus rau KCM.
Nkhuwa tau hais tias daim ntawv cog lus muab hluav taws xob ntau ntawm Zesco thiab CEC, uas tau tas sijhawm rau lub Peb Hlis 31, yuav tsis rov ua dua tshiab.
Daim ntawv cog lus muab hluav taws xob ntawm CEC thiab KCM kuj tau xaus rau lub Peb Hlis 31 thiab tau txuas ntxiv los ntawm kev sib cog lus tsuas yog txog lub Tsib Hlis 31, CEC tau hais hauv nqe lus rau hnub Sunday. KCM tshuav lub tuam txhab hluav taws xob $ 132 lab, CEC tau hais.
"Kev sib tham rau nws qhov txuas ntxiv tau tawg lawm, txawm hais tias CEC qhov kev siv zog zoo tshaj plaws hauv kev ntseeg siab kom tau txais daim ntawv cog lus tshiab," tsab ntawv tshaj tawm tau hais.
Daim ntawv tshaj tawm KCM tau hais tias, tom qab tas sijhawm ntawm nws daim ntawv cog lus nrog CEC, lub tuam txhab tau nkag mus rau lwm qhov kev pom zoo nrog Zesco, pib lub Rau Hli 1.
KCM tau hais tias "Peb cia siab tias yuav muaj kev hloov pauv tsis sib haum xeeb hauv kev muab lub zog los ntawm CEC mus rau Zesco thiab kev cuam tshuam lossis kev txwv yuav yog kev ua phem rau," KCM tau hais.
Hauv kev sim ua kom pom zoo rau daim ntawv cog lus tshiab, CEC nrhiav kev daws KCM cov nuj nqis tseem ceeb $ 132 lab thiab tseem tau txais kev cog lus ruaj khov los ntawm KCM txog kev them nqi hluav taws xob raws sijhawm, nws hais.
CEC tau hais tias nws tau ceeb toom rau KCM tias nws cov khoom yuav raug txiav tawm, ntxiv tias qhov no tsuas yog qhov kev xaiv muaj tom qab kev sib tham ua tsis tiav.
CEC tau hais tias "Kev saib xyuas tas mus li tau ua kom paub tseeb tias cov txheej txheem ntawm kev txiav cov khoom siv txuas ntxiv ua kom muaj kev nyab xeeb ntawm cov neeg ua haujlwm thiab cov cuab yeej siv thiab khaws cia kev ncaj ncees ntawm mine," CEC tau hais.
Is Nrias teb Vedanta muaj txog 80% ntawm KCM.
Thaum Zesco yuav tam sim no thauj hluav taws xob mus rau KCM, nws tseem yuav taug kev los ntawm CEC cov kab hluav taws xob. Nkhuwa hais tias CEC yuav ua txhaum txoj cai yog tias nws tsis kam thauj lub hwj chim.
"Kuv tau tshaj tawm tsab cai lij choj rau hnub Friday, tshaj tawm cov kab CEC ib tus neeg nqa khoom. CEC yog li ntawd yuav tsum thauj lub zog los ntawm Zesco mus rau KCM ntawm tus nqi, "Nkhuwa hais.
Pob Zeb Zeb Liner Khoom Xaiv
Cov khoom sib txawv crushed, txawv kev ua haujlwm xav tau cov ntaub ntawv sib txawv kom haum. Tsis tas li ntawd, cov ntxhib sib tsoo compartment thiab nplua sib tsoo compartment xav tau cov ntaub ntawv sib txawv.
H&G Machinery muab cov khoom hauv qab no los nrum koj lub pob zeb liner:
Manganese hlau
Cov ntsiab lus ntawm cov manganese steel pob zeb hauv ob sab phlu yog feem ntau 11-14%, thiab cov ntsiab lus carbon feem ntau yog 0.90-1.50%, feem ntau yog siab dua 1.0%. Ntawm qhov cuam tshuam qis, qhov hardness tuaj yeem ncav cuag HB300-400. Thaum muaj kev cuam tshuam loj, lub hardness tuaj yeem ncav cuag HB500-800. Nyob ntawm qhov cuam tshuam, qhov tob ntawm txheej txheej hardened tuaj yeem ncav cuag 10-20mm. Lub hardened txheej nrog siab hardness tuaj yeem tiv thaiv kev cuam tshuam thiab txo qis hnav. High manganese steel muaj kev ua tau zoo los tiv thaiv kev hnav zoo nyob rau hauv cov xwm txheej ntawm kev cuam tshuam zoo abrasive hnav, yog li nws feem ntau siv rau hauv qhov hnav-tiv taus ntawm cov mining, cov khoom siv, thermal zog, thiab lwm yam khoom siv kho tshuab. Nyob rau hauv cov xwm txheej uas tsis tshua muaj kev cuam tshuam, siab manganese hlau tsis tuaj yeem ua rau cov yam ntxwv ntawm cov khoom siv vim tias kev ua haujlwm hardening tsis pom tseeb.
Tshuaj muaj pes tsawg leeg
| Lub npe | Chemical Composition (%) | |||||||
| C | Si | Mn | Cr | Mo | Cu | P | S | |
| Mn14 Mill Liner | 0.9-1.5 hli | 0.3-1.0 | 11-14 | 0-2.5 hli | 0-0.5 hli | ≤ 0.05 | ≤ 0.06 | ≤ 0.06 |
| Mn18 Zeb Liner | 1.0-1.5 hli | 0.3-1.0 | 16-19 | 0-2.5 hli | 0-0.5 hli | ≤ 0.05 | ≤ 0.06 | ≤ 0.06 |
Mechanical zog thiab metallographic qauv
| Lub npe | Surface Hardness (HB) | Tus nqi cuam tshuam Ak (J / cm2) | Microstructure |
| Mn14 Mill Liner | ≤ 240 | ≥100 | A + C |
| Mn18 Zeb Liner | ≤ 260 | ≥150 | A + C |
| C -Carbide | Carbide A-Retained austenite | Austenite | |||
Khoom specification
| Loj | Qhov Dia.(mm) | Liner Ntev (mm) | ||
| ≤ 40 | ≥40 | ≤250 | ≥250 | |
| Ua siab ntev | +20 | +30 | +20 | +30 |
Chrome Alloy hlau
Chromium alloy cam khwb cia hlau muab faib ua high chromium alloy cam khwb cia hlau (chromium ntsiab lus 8-26% carbon ntsiab lus 2.0-3.6%), nruab nrab chromium alloy cam khwb cia hlau (chromium ntsiab lus 4-6%, carbon ntsiab lus 2.0-3.2%), tsawg chromium Peb hom alloy cam khwb cia hlau (chromium ntsiab lus 1-3%, cov ntsiab lus carbon 2.1-3.6%). Nws qhov zoo tshaj plaws feature yog hais tias lub microhardness ntawm M7C3 eutectic carbide yog HV1300-1800, uas yog faib nyob rau hauv daim ntawv ntawm ib tug tawg network thiab cais nyob rau hauv lub martensite (lub hardest qauv nyob rau hauv cov hlau matrix) matrix, txo cov cleavage nyhuv ntawm matrix. Yog li ntawd, high-chromium alloy liner muaj lub zog siab, pob zeb toughness, thiab siab hnav tsis kam, thiab nws qhov kev ua tau zoo sawv cev rau qib siab tshaj plaws ntawm cov khoom siv hlau tam sim no.
Tshuaj muaj pes tsawg leeg
| Lub npe | Chemical Composition (%) | |||||||
| C | Si | Mn | Cr | Mo | Cu | P | S | |
| High Chrome Alloy Liner | 2.0-3.6 | 0-1.0 Nws | 0-2.0 Nws | 8–26 | ≤3.0 | ≤1.2 | ≤ 0.06 | ≤ 0.06 |
| Nruab nrab Chrome Alloy Liner | 2.0-3.3 | 0-1.2 hli | 0-2.0 Nws | 4-8 | ≤3.0 | ≤1.2 | ≤ 0.06 | ≤ 0.06 |
| Tsawg Chrome Alloy Liner | 2.1-3.6 | 0-1.5 hli | 0-2.0 Nws | 1-3 | 0-1.0 Nws | ≤1.2 | ≤ 0.06 | ≤ 0.06 |
Mechanical zog thiab metallographic qauv
| Lub npe | Nto (HRC) Ak (J / cm2) | Microstructure | ||||
| High Chrome Alloy Liner | ≥58 | ≥3.5 | M+C+A | |||
| Nruab nrab Chrome Alloy Liner | ≥48 | ≥10 | M+C | |||
| Tsawg Chrome Alloy Liner | ≥45 | ≥15 | M+C+P | |||
| M- Martensite | C - Carbide | A-Austenite | P-Pearlite | |||
Khoom specification
| Loj | Qhov Dia.(mm) Liner Length (mm) | |||
| ≤ 40 | ≥40 | ≤250 | ≥250 | |
| Ua siab ntev | +20 | +30 | +20 | +30 |
Cr-Mo Alloy hlau
H&G Machinery siv Cr-Mo alloy hlau los nrum pob zeb liner. Cov khoom siv no raws li Australia tus qauv, (AS2074 Standard L2B, thiab AS2074 Standard L2C) nws muab kev cuam tshuam zoo dua thiab hnav tsis kam nyob rau hauv txhua daim ntawv thov semi-autogenous milling.
Tshuaj muaj pes tsawg leeg
| Code | Chemical Elements (%) | |||||||
| C | Si | Mn | Cr | Mo | Cu | P | S | |
| L2B | 0.6-0.9 hli | 0.4-0.7 hli | 0.6-1.0 | 1.8-2.1 | 0.2-0.4 hli | 0.3-0.5 hli | ≤ 0.04 | ≤ 0.06 |
| L2C | 0.3-0.45 Nws | 0.4-0.7 hli | 1.3-1.6 | 2.5-3.2 | 0.6-0.8 hli | 0.3-0.5 hli | ≤ 0.04 | ≤ 0.06 |
Physical Property & Microstructure
| Code | Hardness (HB) | Ak (J / cm2) | Microstructure |
| L2B | 325-375 : kuv | ≥50 | P |
| L2C | 350-400 Nws | ≥75 | M |
| M-Martensite, C-Carbide, A-Austenite, P-Pearlite | |||
Ni-Hard Steel
Ni-Hard yog ib qho dawb cam khwb cia hlau, alloyed nrog npib tsib xee thiab chromium haum rau qhov tsis tshua muaj kev cuam tshuam, zawv zawg abrasion rau ob qho tib si ntub thiab qhuav. Ni-Hard yog cov khoom siv hnav-resistant, cam khwb cia rau hauv cov ntaub ntawv thiab cov duab uas zoo tagnrho rau siv nyob rau hauv abrasive thiab hnav ib puag ncig thiab kev siv.
Tshuaj muaj pes tsawg leeg
| Lub npe | C | Si | Mn | Ni | Cr | S | P | Mo | Hardness |
| Ni-Hard AS2027 Gr Ni Cr 1-550 | 3.2-3.6 | 0.3-0.8 hli | 0.2-0.8 hli | 3.0-5.0 | 1.5-3.0 Nws | ≤ 0.12 | ≤ 0.15 | ≤0.5 | 550-600 HBN |
| Ni-Hard AS2027 Gr Ni Cr 2-550 | 2.8-3.2 | 0.3-0.8 hli | 0.2-0.8 hli | 3.0-5.0 | 1.5-3.0 Nws | ≤ 0.12 | ≤ 0.15 | ≤0.5 | 500-550 HBN |
| Ni-Hard AS2027 Gr Ni Cr 2-550 | 3.2-3.6 | 1.5-2.2 | 0.2-0.8 hli | 4.0-5.5 | 8.0-10.0 Nws | ≤ 0.12 | ≤ 0.15 | ≤0.5 | 630-670 HBN |
Dawb Hlau Hlau
Tshuaj muaj pes tsawg leeg
| Lub npe | Chemical Composition (%) | |||||||
| C | Si | Mn | Cr | Mo | Cu | P | S | |
| Dawb Hlau Hlau Liner | 2.0-3.3 | 0-0.8 hli | ≤ 2.0 | 12-26 | ≤3.0 | ≤1.2 | ≤ 0.06 | ≤ 0.06 |
Physical Property & Microstructure
| Lub npe | HRC | Ak(J/cm2) | Microstructure |
| Dawb Hlau Hlau Liner | ≥58 | ≥3.5 | M+C+A |
| M-Martensite C-Carbide A-Austenite | |||
Yog tias koj muaj lus nug tshwj xeeb, thov hu rau peb tus engineer los pab koj!
Nick Sun [email protected]
Post lub sij hawm: Jun-19-2020