CEC ee Zambia si ay u joojiso korontada Konkola Copper Mines
Shirkadda Copperbelt Energy Corp (CEC) ee Zambia ayaa joojin doonta tamarta ay siiso qaybta deegaanka ee Vedanta ee Konkola Copper Mines (KCM) laga bilaabo Isniinta, ayay tidhi ka dib markii wadahadal ku saabsan kordhinta heshiiskooda saadka uu burburay deyn lagu leeyahay CEC.
Wasiirka Tamarta Zambia Mathew Nhkuwa ayaa u sheegay wakaalada wararka ee Reuters in KCM ay hadda si toos ah uga heli doonto korontada ay dowladdu leedahay ee Zesco, taasoo horay korontada uga iibisay CEC si ay u sii gaarsiiso KCM.
Nkhuwa wuxuu sheegay in heshiiska korontada badan ee u dhexeeya Zesco iyo CEC, kaasoo dhacay Maarso 31, aan dib loo cusboonaysiin doonin.
Heshiiskii korontadda ee u dhaxeeyay CEC iyo KCM ayaa sidoo kale soo idlaaday 31-kii Maarso waxaana lagu kordhiyay heshiis labada dhinac ah ilaa iyo May 31, CEC ayaa bayaan ku sheegtay Axadii. KCM ayaa shirkadda tamarta ku leh $132 milyan, ayuu yiri CEC.
"Wada xaajoodka kordhinta dheeraadka ah ayaa burburay, inkastoo CEC ay si niyad sami ah u bixisay si loo helo qandaraas cusub," ayaa lagu yiri bayaanka.
Bayaan ka soo baxay KCM ayaa lagu sheegay in, kadib markii uu dhacay qandaraaskii ay kula jirtay CEC, ay shirkaddu heshiis kale la gashay Zesco, kaasoo dhaqan galaya 1-da June.
"Waxaan filaynaa isbeddel aan kala go 'lahayn ee sahayda awoodda CEC ilaa Zesco iyo faragelin kasta ama xaddidaad kasta waxay noqon doontaa fal qaran dumis," ayuu yiri KCM.
Isku dayga lagu heshiiyo qandaraaska cusub, CEC waxa ay rabta in ay xalliso KCM deynteeda 132 milyan ee wali taagan iyo sidoo kale in ay KCM ka hesho balan qaad adag oo ku saabsan bixinta khidmadaha korontada mustaqbalka, ayay tiri.
CEC ayaa sheegtay in ay ku wargelisay KCM in sahaydeeda la joojin doono, iyadoo intaas ku dartay in tani ay tahay doorashada keliya ee la heli karo kaddib wadahadalladii fashilmay.
"Taxadir ku habboon ayaa loo qaaday si loo hubiyo in habka joojinta saadka ay hubiso badbaadada shaqaalaha iyo qalabka iyo ilaalinta sharafta miinada," CEC ayaa tiri.
Vedanta Hindiya waxay leedahay ilaa 80% KCM.
Halka Zesco uu hadda korantada u qaadi doono KCM, waxa ay wali sii mari doontaa xadhkaha korantada ee CEC. Nkhuwa wuxuu sheegay in CEC ay jebin doonto sharciga haddii ay diido in ay rarto awoodda.
"Waxaan soo saaray qalab sharci Jimcihii, anigoo ku dhawaaqaya khadadka CEC side guud. CEC sidaas darteed waxaa waajib ku ah in ay korontada ka soo qaado Zesco una geyso KCM qiimo," ayuu yiri Nkhuwa.
Kubadda Mill Liner Xulashada Qalabka
Waxyaabaha kala duwan ee la jajabiyey, xaaladaha shaqada ee kala duwan waxay u baahan yihiin qalabyo kala duwan oo ku habboon. Sidoo kale, qaybta wax lagu shiido ee aan qallafsanayn iyo qaybta wax lagu shiido waxay u baahan tahay qalabyo kala duwan.
H&G ayaa bixiya agabka soo socda si aad u tuurto makiinadaada kubbadda:
Birta Manganese
Maaddada manganese ee saxanka sare ee birta birta manganese ee saxanka dahaarka guud ahaan waa 11-14%, kaarboonku guud ahaan waa 0.90-1.50%, kuwaas oo intooda badan ka sarreeya 1.0%. Markay tahay culayska saamaynta hooseeya, engegnaanta waxay gaari kartaa HB300-400. Marka culeyska sareeyo, engegnaanta waxay gaari kartaa HB500-800. Iyadoo ku xiran culeyska saameynta, qoto dheer ee lakabka adag wuxuu gaari karaa 10-20mm. Lakabka qallafsan ee leh qallafsanaanta sare waxay iska caabin kartaa saameynta waxayna yareyn kartaa dharbaaxada. Birta manganese-ka sare waxay leedahay wax qabad heer sare ah oo ka-hortagga xirashada iyadoo la raacayo xaaladda saameyn xooggan oo daal ah, sidaas darteed waxaa badanaa loo isticmaalaa qaybaha xirashada u adkaysta ee macdanta, qalabka dhismaha, awoodda kulaylka, iyo qalabka kale ee farsamada. Marka la eego shuruudaha xaaladaha saameynta hooseeya, birta manganese sare ma sameyn karto sifooyinka walxaha sababtoo ah saameynta adkeynta shaqadu maaha mid cad.
Halabuurka Kiimikada
| Magaca | Halabuurka Kiimikada (%) | |||||||
| C | Si | Mn | Cr | Mo | Cu | P | S | |
| Mn14 Mill Liner | 0.9-1.5 | 0.3-1.0 | 11-14 | 0-2.5 | 0-0.5 | ≤0.05 | ≤0.06 | ≤0.06 |
| Mn18 Mill Liner | 1.0-1.5 | 0.3-1.0 | 16-19 | 0-2.5 | 0-0.5 | ≤0.05 | ≤0.06 | ≤0.06 |
Guryaha makaanikada iyo qaab-dhismeedka biraha
| Magaca | Hardness Dusha sare (HB) | Qiimaha Saamaynta Ak (J/cm2) | Qaab-dhismeedka yar yar |
| Mn14 Mill Liner | ≤240 | ≥100 | A+C |
| Mn18 Mill Liner | ≤260 | ≥150 | A+C |
| C -Carbide | Carbide A-ustenite la hayo | Austenite | |||
Tilmaamaha alaabta
| Cabbirka | Hole Dia (mm) | Dhererka xadhkaha (mm) | ||
| ≤40 | ≥40 | ≤250 | ≥250 | |
| Dulqaad | +20 | +30 | +20 | +30 |
Birta Daawaha ee Chrome
Birta daawaha ee Chromium waxa loo qaybiyaa birta chromium aluminium sare ah (koox ka kooban 8-26% kaarboon ka kooban 2.0-3.6%), birta daawaha chromium dhexdhexaad ah ( content chromium 4-6%, content carbon 2.0-3.2%), hoose Saddex nooc oo ah birta dabaysha (ka kooban chromium 1-3%, kaarboonka 2.1-3.6%). Muuqaalkeeda cajiibka ah ayaa ah in microhardness ee M7C3 eutectic carbide uu yahay HV1300-1800, kaas oo loo qaybiyo qaab shabakad jaban oo go'doonsan martensite (qaabka ugu adag ee shaxanka birta) matrix, yaraynta saameynta dillaaca ee matrixka. Sidaa darteed, xargaha daawaynta sare ee chromium-ka ayaa leh awood sare, adkaanta kubbadda, iyo caabbinta sare ee dharka, iyo waxqabadkeedu wuxuu ka dhigan yahay heerka ugu sarreeya ee qalabka birta u adkaysta ee hadda jira.
Halabuurka Kiimikada
| Magaca | Halabuurka Kiimikada (%) | |||||||
| C | Si | Mn | Cr | Mo | Cu | P | S | |
| Khadka Sare ee Aloyiga Chrome | 2.0-3.6 | 0-1.0 | 0-2.0 | 8-26 | ≤3.0 | ≤1.2 | ≤0.06 | ≤0.06 |
| Dhexdhexaadiyaha Alloy Chrome | 2.0-3.3 | 0-1.2 | 0-2.0 | 4-8 | ≤3.0 | ≤1.2 | ≤0.06 | ≤0.06 |
| Xadhkaha Dabeecadda Aloyiga ee Chrome Low | 2.1-3.6 | 0-1.5 | 0-2.0 | 1-3 | 0-1.0 | ≤1.2 | ≤0.06 | ≤0.06 |
Guryaha makaanikada iyo qaab-dhismeedka biraha
| Magaca | Dusha sare (HRC) Ak (J/cm2) | Qaab-dhismeedka yar yar | ||||
| Khadka Sare ee Aloyiga Chrome | ≥58 | ≥3.5 | M+C+A | |||
| Dhexdhexaadiyaha Alloy Chrome | ≥48 | ≥10 | M+C | |||
| Xadhkaha Dabeecadda Aloyiga ee Chrome Low | ≥45 | ≥15 | M+C+P | |||
| M- Martensite | C - Carbide | A-Austenite | P-Pearlite | |||
Tilmaamaha alaabta
| Cabbirka | Hole Dia. (mm) Dhererka xadhkaha (mm) | |||
| ≤40 | ≥40 | ≤250 | ≥250 | |
| Dulqaad | +20 | +30 | +20 | +30 |
Cr-Mo Alloy Steel
Mashiinnada H&G waxay adeegsadaan birta daawaynta ee Cr-Mo si ay u tuuraan makiinada wax-shiidka. Walaxdan oo ku salaysan heerka Australia, (AS2074 Standard L2B, iyo AS2074 Standard L2C) waxa ay bixisa saamayn heersare ah oo ay xidhato iska caabin dhammaan codsiyada wax-shiidka ee semi-autogenous.
Halabuurka Kiimikada
| Koodhka | Walxaha Kiimikada (%) | |||||||
| C | Si | Mn | Cr | Mo | Cu | P | S | |
| L2B | 0.6-0.9 | 0.4-0.7 | 0.6-1.0 | 1.8-2.1 | 0.2-0.4 | 0.3-0.5 | ≤0.04 | ≤0.06 |
| L2C | 0.3-0.45 | 0.4-0.7 | 1.3-1.6 | 2.5-3.2 | 0.6-0.8 | 0.3-0.5 | ≤0.04 | ≤0.06 |
Hantida Jirka & Dhismayaasha yar yar
| Koodhka | Hardness (HB) | Ak (J/cm2) | Qaab-dhismeedka yar yar |
| L2B | 325-375 | ≥50 | P |
| L2C | 350-400 | ≥75 | M |
| M-Martensite, C-Carbide, A-Austenite, P-Pearlite | |||
Ni-hard Steel
Ni-Hard waa bir shub ah oo cad, oo lagu daray nikkel iyo chromium oo ku habboon saamaynta hoose, naaxinta simbiriirixan ee codsiyada qoyan iyo kuwa qalalan. Ni-Hard waa shay aad u adkaysi badan, oo lagu shubay foomamka iyo qaababka kuwaas oo ku habboon in loo isticmaalo meelaha xoqan iyo xidhashada jawiga iyo codsiyada.
Halabuurka Kiimikada
| Magaca | C | Si | Mn | Ni | Cr | S | P | Mo | Adag |
| Ni-Hard AS2027 Gr Ni Cr 1-550 | 3.2-3.6 | 0.3-0.8 | 0.2-0.8 | 3.0-5.0 | 1.5-3.0 | ≤0.12 | ≤0.15 | ≤0.5 | 550-600HBN |
| Ni-Hard AS2027 Gr Ni Cr 2-550 | 2.8-3.2 | 0.3-0.8 | 0.2-0.8 | 3.0-5.0 | 1.5-3.0 | ≤0.12 | ≤0.15 | ≤0.5 | 500-550HBN |
| Ni-Hard AS2027 Gr Ni Cr 2-550 | 3.2-3.6 | 1.5-2.2 | 0.2-0.8 | 4.0-5.5 | 8.0-10.0 | ≤0.12 | ≤0.15 | ≤0.5 | 630-670HBN |
Birta Cad ee Birta
Halabuurka Kiimikada
| Magaca | Halabuurka Kiimikada (%) | |||||||
| C | Si | Mn | Cr | Mo | Cu | P | S | |
| Xadhkaha Birta Cad ee Birta | 2.0-3.3 | 0-0.8 | ≤2.0 | 12-26 | ≤3.0 | ≤1.2 | ≤0.06 | ≤0.06 |
Hantida Jirka & Dhismayaasha yar yar
| Magaca | HRC | Ak (J/cm2) | Qaab-dhismeedka yar yar |
| Xadhkaha Birta Cad ee Birta | ≥58 | ≥3.5 | M+C+A |
| M-Martensite C- Carbide A-Austenite | |||
Haddii aad hayso su'aal gaar ah, fadlan la xidhiidh injineerkayaga si uu kuugu adeego!
Nick Sun [email protected]
Waqtiga boostada: Juun-19-2020